Rebase.Data.ByteString.Lazy

The group function takes a ByteString and returns a list of ByteStrings such that the concatenation of the result is equal to the argument. Moreover, each string in the result contains only equal elements. For example,

group "Mississippi" = ["M","i","ss","i","ss","i","pp","i"]

It is a special case of groupBy, which allows the programmer to supply their own equality test.

A space-efficient representation of a Word8 vector, supporting many efficient operations.

A LazyByteString contains 8-bit bytes, or by using the operations from Data.ByteString.Lazy.Char8 it can be interpreted as containing 8-bit characters.

O(n) Applied to a predicate and a ByteString, all determines if all elements of the ByteString satisfy the predicate.

O(n) Applied to a predicate and a ByteString, any determines if any element of the ByteString satisfies the predicate.

O(n) Concatenate a list of ByteStrings.

Map a function over a ByteString and concatenate the results

O(n) elem is the ByteString membership predicate.

foldl, applied to a binary operator, a starting value (typically the left-identity of the operator), and a ByteString, reduces the ByteString using the binary operator, from left to right.

foldl1 is a variant of foldl that has no starting value argument, and thus must be applied to non-empty ByteStrings.

foldr, applied to a binary operator, a starting value (typically the right-identity of the operator), and a ByteString, reduces the ByteString using the binary operator, from right to left.

foldr1 is a variant of foldr that has no starting value argument, and thus must be applied to non-empty ByteStrings

O(n) maximum returns the maximum value from a ByteString

O(n) minimum returns the minimum value from a ByteString

O(n) notElem is the inverse of elem

O(n) unzip transforms a list of pairs of bytes into a pair of ByteStrings. Note that this performs two pack operations.

O(n) The find function takes a predicate and a ByteString, and returns the first element in matching the predicate, or Nothing if there is no such element.

find f p = case findIndex f p of Just n -> Just (p ! n) ; _ -> Nothing

foldl' is like foldl, but strict in the accumulator.

The mapAccumL function behaves like a combination of map and foldl; it applies a function to each element of a ByteString, passing an accumulating parameter from left to right, and returning a final value of this accumulator together with the new ByteString.

The mapAccumR function behaves like a combination of map and foldr; it applies a function to each element of a ByteString, passing an accumulating parameter from right to left, and returning a final value of this accumulator together with the new ByteString.

O(1) The empty ByteString

O(1) Test whether a ByteString is empty.

O(c) length returns the length of a ByteString as an Int64

O(n) map f xs is the ByteString obtained by applying f to each element of xs.

O(n) Converts a ByteString to a '[Word8]'.

O(n/c) Returns all the elements of a ByteString except the last one.

This is a partial function, consider using unsnoc instead.

repeat x is an infinite ByteString, with x the value of every element.

O(n) replicate n x is a ByteString of length n with x the value of every element.

O(n) reverse xs returns the elements of xs in reverse order.

O(n/c) splitAt n xs is equivalent to (take n xs, drop n xs).

O(n/c) take n, applied to a ByteString xs, returns the prefix of xs of length n, or xs itself if n > length xs.

Similar to Prelude.takeWhile, returns the longest (possibly empty) prefix of elements satisfying the predicate.

O(n) zip takes two ByteStrings and returns a list of corresponding pairs of bytes. If one input ByteString is short, excess elements of the longer ByteString are discarded. This is equivalent to a pair of unpack operations.

O(n) filter, applied to a predicate and a ByteString, returns a ByteString containing those characters that satisfy the predicate.

foldr' is like foldr, but strict in the accumulator.

O(c) ByteString index (subscript) operator, starting from 0.

This is a partial function, consider using indexMaybe instead.

zipWith generalises zip by zipping with the function given as the first argument, instead of a tupling function. For example, zipWith (+) is applied to two ByteStrings to produce the list of corresponding sums.

O(n) The intercalate function takes a ByteString and a list of ByteStrings and concatenates the list after interspersing the first argument between each element of the list.

O(n/c) drop n xs returns the suffix of xs after the first n elements, or empty if n > length xs.

O(1) Extract the first element of a ByteString, which must be non-empty.

This is a partial function, consider using uncons instead.

Similar to span, returns the longest (possibly empty) prefix of elements satisfying the predicate and the remainder of the string.

span p is equivalent to break (not . p) and to (takeWhile p &&& dropWhile p).

Outputs a ByteString to the specified Handle.

The chunks will be written one at a time. Other threads might write to the Handle in between, and hence hPut alone is not suitable for concurrent writes.

Write a ByteString to a file.

O(n/c) Append two ByteStrings

O(n) Convert a '[Word8]' into a ByteString.

The findIndex function takes a predicate and a ByteString and returns the index of the first element in the ByteString satisfying the predicate.

O(1) cons is analogous to (Prelude.:) for lists.

foldl1' is like foldl1, but strict in the accumulator.

O(n) The isPrefixOf function takes two ByteStrings and returns True iff the first is a prefix of the second.

scanl is similar to foldl, but returns a list of successive reduced values from the left.

scanl f z [x1, x2, ...] == [z, z `f` x1, (z `f` x1) `f` x2, ...]

Note that

head (scanl f z xs) == z
last (scanl f z xs) == foldl f z xs

O(n/c) Append a byte to the end of a ByteString

O(n) The unfoldr function is analogous to the List 'unfoldr'. unfoldr builds a ByteString from a seed value. The function takes the element and returns Nothing if it is done producing the ByteString or returns Just (a,b), in which case, a is a prepending to the ByteString and b is used as the next element in a recursive call.

O(1) Convert a Word8 into a ByteString

count returns the number of times its argument appears in the ByteString

count = length . elemIndices

But more efficiently than using length on the intermediate list.

The intersperse function takes a Word8 and a ByteString and `intersperses' that byte between the elements of the ByteString. It is analogous to the intersperse function on Lists.

Similar to break, returns the longest (possibly empty) prefix of elements which do not satisfy the predicate and the remainder of the string.

break p is equivalent to span (not . p) and to (takeWhile (not . p) &&& dropWhile (not . p)).

O(c) compareLength compares the length of a ByteString to an Int64

O(n) Make a copy of the ByteString with its own storage. This is mainly useful to allow the rest of the data pointed to by the ByteString to be garbage collected, for example if a large string has been read in, and only a small part of it is needed in the rest of the program.

O(n) dropEnd n xs is equivalent to take (length xs - n) xs. Drops n elements from end of bytestring.

>>> dropEnd 3 "abcdefg""abcd">>> dropEnd 0 "abcdefg""abcdefg">>> dropEnd 4 "abc"""

Similar to Prelude.dropWhile, drops the longest (possibly empty) prefix of elements satisfying the predicate and returns the remainder.

Similar to dropWhileEnd, drops the longest (possibly empty) suffix of elements satisfying the predicate and returns the remainder.

dropWhileEnd p is equivalent to reverse . dropWhile p . reverse.

>>> {-# LANGUAGE OverloadedLists #-)>>> dropWhileEnd even [1,2,3,4,6][1,2,3]

The groupBy function is the non-overloaded version of group.

Returns all initial segments of the given ByteString, shortest first.

Returns all initial segments of the given ByteString, shortest first.

O(n) The isSuffixOf function takes two ByteStrings and returns True iff the first is a suffix of the second.

The following holds:

isSuffixOf x y == reverse x `isPrefixOf` reverse y

O(n/c) Extract the last element of a ByteString, which must be finite and non-empty.

This is a partial function, consider using unsnoc instead.

O(n) The partition function takes a predicate a ByteString and returns the pair of ByteStrings with elements which do and do not satisfy the predicate, respectively; i.e.,

partition p bs == (filter p xs, filter (not . p) xs)

scanl1 is a variant of scanl that has no starting value argument.

scanl1 f [x1, x2, ...] == [x1, x1 `f` x2, ...]

scanr is similar to foldr, but returns a list of successive reduced values from the right.

scanr f z [..., x{n-1}, xn] == [..., x{n-1} `f` (xn `f` z), xn `f` z, z]

Note that

head (scanr f z xs) == foldr f z xs
last (scanr f z xs) == z

scanr1 is a variant of scanr that has no starting value argument.

O(n) Break a ByteString into pieces separated by the byte argument, consuming the delimiter. I.e.

split 10  "a\nb\nd\ne" == ["a","b","d","e"]   -- fromEnum '\n' == 10
split 97  "aXaXaXa"    == ["","X","X","X",""] -- fromEnum 'a' == 97
split 120 "x"          == ["",""]             -- fromEnum 'x' == 120
split undefined ""     == []                  -- and not [""]

and

intercalate [c] . split c == id
split == splitWith . (==)

As for all splitting functions in this library, this function does not copy the substrings, it just constructs new ByteStrings that are slices of the original.

O(n) The stripPrefix function takes two ByteStrings and returns Just the remainder of the second iff the first is its prefix, and otherwise Nothing.

O(n) The stripSuffix function takes two ByteStrings and returns Just the remainder of the second iff the first is its suffix, and otherwise Nothing.

O(1) Extract the elements after the head of a ByteString, which must be non-empty.

This is a partial function, consider using uncons instead.

O(n) Returns all final segments of the given ByteString, longest first.

O(n) Returns all final segments of the given ByteString, longest first.

O(c) takeEnd n xs is equivalent to drop (length xs - n) xs. Takes n elements from end of bytestring.

>>> takeEnd 3 "abcdefg""efg">>> takeEnd 0 "abcdefg""">>> takeEnd 4 "abc""abc"

Returns the longest (possibly empty) suffix of elements satisfying the predicate.

takeWhileEnd p is equivalent to reverse . takeWhile p . reverse.

>>> {-# LANGUAGE OverloadedLists #-)>>> takeWhileEnd even [1,2,3,4,6][4,6]

The transpose function transposes the rows and columns of its ByteString argument.

O(1) Extract the head and tail of a ByteString, returning Nothing if it is empty.

O(n/c) Extract the init and last of a ByteString, returning Nothing if it is empty.

• It is no faster than using init and last

Consume the chunks of a lazy ByteString with a strict, tail-recursive, accumulating left fold.

Consume the chunks of a lazy ByteString with a natural right fold.

cycle ties a finite ByteString into a circular one, or equivalently, the infinite repetition of the original ByteString.

O(c) Convert a list of StrictByteString into a LazyByteString

O(1) Convert a StrictByteString into a LazyByteString.

iterate f x returns an infinite ByteString of repeated applications of f to x:

iterate f x == [x, f x, f (f x), ...]

O(c) Convert a LazyByteString into a list of StrictByteString

O(n) Convert a LazyByteString into a StrictByteString.

Note that this is an expensive operation that forces the whole LazyByteString into memory and then copies all the data. If possible, try to avoid converting back and forth between strict and lazy bytestrings.

O(1) ByteString index, starting from 0, that returns Just if:

0 <= n < length bs

Returns the longest (possibly empty) suffix of elements which do not satisfy the predicate and the remainder of the string.

breakEnd p is equivalent to spanEnd (not . p) and to (dropWhileEnd (not . p) &&& takeWhileEnd (not . p)).

O(n) The elemIndex function returns the index of the first element in the given ByteString which is equal to the query element, or Nothing if there is no such element. This implementation uses memchr(3).

O(n) The elemIndices function extends elemIndex, by returning the indices of all elements equal to the query element, in ascending order. This implementation uses memchr(3).

The findIndices function extends findIndex, by returning the indices of all elements satisfying the predicate, in ascending order.

foldr1' is like foldr1, but strict in the accumulator.

O(c) ByteString index, starting from 0, that returns Just if:

0 <= n < length bs

Returns the longest (possibly empty) suffix of elements satisfying the predicate and the remainder of the string.

spanEnd p is equivalent to breakEnd (not . p) and to (dropWhileEnd p &&& takeWhileEnd p).

We have

spanEnd (not . isSpace) "x y z" == ("x y ", "z")

and

spanEnd (not . isSpace) ps
   ==
let (x, y) = span (not . isSpace) (reverse ps) in (reverse y, reverse x)

O(n) Splits a ByteString into components delimited by separators, where the predicate returns True for a separator element. The resulting components do not contain the separators. Two adjacent separators result in an empty component in the output. eg.

splitWith (==97) "aabbaca" == ["","","bb","c",""] -- fromEnum 'a' == 97
splitWith undefined ""     == []                  -- and not [""]

Type synonym for the lazy flavour of ByteString.

Append a ByteString to a file.

O(n) The elemIndexEnd function returns the last index of the element in the given ByteString which is equal to the query element, or Nothing if there is no such element. The following holds:

elemIndexEnd c xs = case elemIndex c (reverse xs) of
  Nothing -> Nothing
  Just i  -> Just (length xs - 1 - i)

The findIndexEnd function takes a predicate and a ByteString and returns the index of the last element in the ByteString satisfying the predicate.

getContents. Equivalent to hGetContents stdin. Will read lazily

Read n bytes into a ByteString, directly from the specified Handle.

Read entire handle contents lazily into a ByteString. Chunks are read on demand, using the default chunk size.

File handles are closed on EOF if all the file is read, or through garbage collection otherwise.

hGetNonBlocking is similar to hGet, except that it will never block waiting for data to become available, instead it returns only whatever data is available. If there is no data available to be read, hGetNonBlocking returns empty.

Note: on Windows and with Haskell implementation other than GHC, this function does not work correctly; it behaves identically to hGet.

Similar to hPut except that it will never block. Instead it returns any tail that did not get written. This tail may be empty in the case that the whole string was written, or the whole original string if nothing was written. Partial writes are also possible.

Note: on Windows and with Haskell implementation other than GHC, this function does not work correctly; it behaves identically to hPut.

A synonym for hPut, for compatibility

The interact function takes a function of type ByteString -> ByteString as its argument. The entire input from the standard input device is passed to this function as its argument, and the resulting string is output on the standard output device.

A specialised version of zipWith for the common case of a simultaneous map over two ByteStrings, to build a 3rd.

Write a ByteString to stdout.

The chunks will be written one at a time. Other threads might write to the stdout in between, and hence putStr alone is not suitable for concurrent writes.

Read an entire file lazily into a ByteString.

The Handle will be held open until EOF is encountered.

Note that this function's implementation relies on hGetContents. The reader is advised to read its documentation.

O(1) Unlike cons, cons' is strict in the ByteString that we are consing onto. More precisely, it forces the head and the first chunk. It does this because, for space efficiency, it may coalesce the new byte onto the first 'chunk' rather than starting a new 'chunk'.

So that means you can't use a lazy recursive contruction like this:

let xs = cons' c xs in xs

You can however use cons, as well as repeat and cycle, to build infinite lazy ByteStrings.