GHC.Float · base-4.20.2.0 · horizon-platform

Classes

2 declarations

classclass Fractional a => Floating a where

Trigonometric and hyperbolic functions and related functions.

The Haskell Report defines no laws for Floating. However, (+), (*) and exp are customarily expected to define an exponential field and have the following properties:

exp (a + b) = exp a * exp b
exp (fromInteger 0) = fromInteger 1

Methods

pi :: a
exp :: a -> a
log :: a -> a
sqrt :: a -> a
(**) :: a -> a -> ainfixr 8
logBase :: a -> a -> a
sin :: a -> a
cos :: a -> a
tan :: a -> a
asin :: a -> a
acos :: a -> a
atan :: a -> a
sinh :: a -> a
cosh :: a -> a
tanh :: a -> a
asinh :: a -> a
acosh :: a -> a
atanh :: a -> a
log1p :: a -> a
log1p x computes log (1 + x), but provides more precise results for small (absolute) values of x if possible.
expm1 :: a -> a
expm1 x computes exp x - 1, but provides more precise results for small (absolute) values of x if possible.
log1pexp :: a -> a
log1pexp x computes log (1 + exp x), but provides more precise results if possible.
Examples:
- if x is a large negative number, log (1 + exp x) will be imprecise for the reasons given in log1p.
- if exp x is close to -1, log (1 + exp x) will be imprecise for the reasons given in expm1.
log1mexp :: a -> a
log1mexp x computes log (1 - exp x), but provides more precise results if possible.
Examples:
- if x is a large negative number, log (1 - exp x) will be imprecise for the reasons given in log1p.
- if exp x is close to 1, log (1 - exp x) will be imprecise for the reasons given in expm1.

Instances10Floating, …

Floating CDoubleDefined in ghc-internal-9.1003.0 · GHC.Internal.Foreign.C.Types
Floating CFloatDefined in ghc-internal-9.1003.0 · GHC.Internal.Foreign.C.Types
Floating DoubleDefined in ghc-internal-9.1003.0 · GHC.Internal.Float
Floating FloatDefined in ghc-internal-9.1003.0 · GHC.Internal.Float
Floating a => Floating (Identity a)Defined in ghc-internal-9.1003.0 · GHC.Internal.Data.Functor.Identity
Floating a => Floating (Down a)Defined in ghc-internal-9.1003.0 · GHC.Internal.Data.Ord
RealFloat a => Floating (Complex a)Defined in base-4.20.2.0 · Data.Complex
Floating a => Floating (Op a b)Defined in base-4.20.2.0 · Data.Functor.Contravariant
Floating a => Floating (Const a b)Defined in ghc-internal-9.1003.0 · GHC.Internal.Data.Functor.Const
Floating (f (g a)) => Floating (Compose f g a)Defined in base-4.20.2.0 · Data.Functor.Compose

classclass (RealFrac a, Floating a) => RealFloat a where

#

Efficient, machine-independent access to the components of a floating-point number.

Methods

floatRadix :: a -> Integer
a constant function, returning the radix of the representation (often 2)
floatDigits :: a -> Int
a constant function, returning the number of digits of floatRadix in the significand
floatRange :: a -> (Int, Int)
a constant function, returning the lowest and highest values the exponent may assume
decodeFloat :: a -> (Integer, Int)
The function decodeFloat applied to a real floating-point number returns the significand expressed as an Integer and an appropriately scaled exponent (an Int). If decodeFloat x yields (m,n), then x is equal in value to m*b^^n, where b is the floating-point radix, and furthermore, either m and n are both zero or else b^(d-1) <= abs m < b^d, where d is the value of floatDigits x. In particular, decodeFloat 0 = (0,0). If the type contains a negative zero, also decodeFloat (-0.0) = (0,0). The result of decodeFloat x is unspecified if either of isNaN x or isInfinite x is True.
encodeFloat :: Integer -> Int -> a
encodeFloat performs the inverse of decodeFloat in the sense that for finite x with the exception of -0.0, Prelude.uncurry encodeFloat (decodeFloat x) = x. encodeFloat m n is one of the two closest representable floating-point numbers to m*b^^n (or ±Infinity if overflow occurs); usually the closer, but if m contains too many bits, the result may be rounded in the wrong direction.
exponent :: a -> Int
exponent corresponds to the second component of decodeFloat. exponent 0 = 0 and for finite nonzero x, exponent x = snd (decodeFloat x) + floatDigits x. If x is a finite floating-point number, it is equal in value to significand x * b ^^ exponent x, where b is the floating-point radix. The behaviour is unspecified on infinite or NaN values.
significand :: a -> a
The first component of decodeFloat, scaled to lie in the open interval (-1,1), either 0.0 or of absolute value >= 1/b, where b is the floating-point radix. The behaviour is unspecified on infinite or NaN values.
scaleFloat :: Int -> a -> a
multiplies a floating-point number by an integer power of the radix
isNaN :: a -> Bool
True if the argument is an IEEE "not-a-number" (NaN) value
isInfinite :: a -> Bool
True if the argument is an IEEE infinity or negative infinity
isDenormalized :: a -> Bool
True if the argument is too small to be represented in normalized format
isNegativeZero :: a -> Bool
True if the argument is an IEEE negative zero
isIEEE :: a -> Bool
True if the argument is an IEEE floating point number
atan2 :: a -> a -> a
a version of arctangent taking two real floating-point arguments. For real floating x and y, atan2 y x computes the angle (from the positive x-axis) of the vector from the origin to the point (x,y). atan2 y x returns a value in the range [-pi, pi]. It follows the Common Lisp semantics for the origin when signed zeroes are supported. atan2 y 1, with y in a type that is RealFloat, should return the same value as atan y. A default definition of atan2 is provided, but implementors can provide a more accurate implementation.

Instances8RealFloat, …

RealFloat CDoubleDefined in ghc-internal-9.1003.0 · GHC.Internal.Foreign.C.Types
RealFloat CFloatDefined in ghc-internal-9.1003.0 · GHC.Internal.Foreign.C.Types
RealFloat DoubleDefined in ghc-internal-9.1003.0 · GHC.Internal.Float
RealFloat FloatDefined in ghc-internal-9.1003.0 · GHC.Internal.Float
RealFloat a => RealFloat (Identity a)Defined in ghc-internal-9.1003.0 · GHC.Internal.Data.Functor.Identity
RealFloat a => RealFloat (Down a)Defined in ghc-internal-9.1003.0 · GHC.Internal.Data.Ord
RealFloat a => RealFloat (Const a b)Defined in ghc-internal-9.1003.0 · GHC.Internal.Data.Functor.Const
RealFloat (f (g a)) => RealFloat (Compose f g a)Defined in base-4.20.2.0 · Data.Functor.Compose

Float

2 declarations

datadata Float

#

Single-precision floating point numbers. It is desirable that this type be at least equal in range and precision to the IEEE single-precision type.

Constructors

F# Float#

Instances25Enum, Floating, Fractional, Data, Num, Read, …

Enum FloatDefined in ghc-internal-9.1003.0 · GHC.Internal.Float · orphan
fromEnum just truncates its argument, beware of all sorts of overflows.
List generators have extremely peculiar behavior, mandated by Haskell Report 2010:
Example1 expression
```
>>> [0..1.5 :: Float][0.0,1.0,2.0]
```
Eq FloatDefined in ghc-prim-0.12.0 · GHC.Classes
Note that due to the presence of NaN, Float's Eq instance does not satisfy reflexivity.
Example1 expression
```
>>> 0/0 == (0/0 :: Float)False
```
Also note that Float's Eq instance does not satisfy extensionality:
Example2 expressions
```
>>> 0 == (-0 :: Float)True>>> recip 0 == recip (-0 :: Float)False
```
Floating FloatDefined in ghc-internal-9.1003.0 · GHC.Internal.Float
Fractional FloatDefined in ghc-internal-9.1003.0 · GHC.Internal.Float · orphan
This instance implements IEEE 754 standard with all its usual pitfalls about NaN, infinities and negative zero.
Example4 expressions
```
>>> 0 == (-0 :: Float)True>>> recip 0 == recip (-0 :: Float)False>>> map (/ 0) [-1, 0, 1 :: Float][-Infinity,NaN,Infinity]>>> map (* 0) $ map (/ 0) [-1, 0, 1 :: Float][NaN,NaN,NaN]
```
Data FloatDefined in ghc-internal-9.1003.0 · GHC.Internal.Data.Data
Num FloatDefined in ghc-internal-9.1003.0 · GHC.Internal.Float · orphan
This instance implements IEEE 754 standard with all its usual pitfalls about NaN, infinities and negative zero. Neither addition nor multiplication are associative or distributive:
Example3 expressions
```
>>> (0.1 + 0.1 :: Float) + 0.5 == 0.1 + (0.1 + 0.5)False>>> (0.1 + 0.2 :: Float) * 0.9 == 0.1 * 0.9 + 0.2 * 0.9False>>> (0.1 * 0.1 :: Float) * 0.9 == 0.1 * (0.1 * 0.9)False
```
Ord FloatDefined in ghc-prim-0.12.0 · GHC.Classes
See instance Ord Double for discussion of deviations from IEEE 754 standard.
Read FloatDefined in ghc-internal-9.1003.0 · GHC.Internal.Read
Real FloatDefined in ghc-internal-9.1003.0 · GHC.Internal.Float · orphan
Beware that toRational generates garbage for non-finite arguments:
Example2 expressions
```
>>> toRational (1/0 :: Float)340282366920938463463374607431768211456 % 1>>> toRational (0/0 :: Float)510423550381407695195061911147652317184 % 1
```
RealFloat FloatDefined in ghc-internal-9.1003.0 · GHC.Internal.Float
RealFrac FloatDefined in ghc-internal-9.1003.0 · GHC.Internal.Float · orphan
Beware that results for non-finite arguments are garbage:
Example2 expressions
```
>>> [ f x | f <- [round, floor, ceiling], x <- [-1/0, 0/0, 1/0 :: Float] ] :: [Int][0,0,0,0,0,0,0,0,0]>>> map properFraction [-1/0, 0/0, 1/0] :: [(Int, Float)][(0,0.0),(0,0.0),(0,0.0)]
```
and get even more non-sensical if you ask for Integer instead of Int.
Show FloatDefined in ghc-internal-9.1003.0 · GHC.Internal.Float · orphan
Storable FloatDefined in ghc-internal-9.1003.0 · GHC.Internal.Foreign.Storable
PrintfArg FloatDefined in base-4.20.2.0 · Text.Printf
Generic1 (URec Float)Defined in ghc-internal-9.1003.0 · GHC.Internal.Generics
Foldable UFloatDefined in ghc-internal-9.1003.0 · GHC.Internal.Data.Foldable
Traversable UFloatDefined in ghc-internal-9.1003.0 · GHC.Internal.Data.Traversable
Functor (URec Float)Defined in ghc-internal-9.1003.0 · GHC.Internal.Generics
Eq (URec Float p)Defined in ghc-internal-9.1003.0 · GHC.Internal.Generics
Ord (URec Float p)Defined in ghc-internal-9.1003.0 · GHC.Internal.Generics
Show (URec Float p)Defined in ghc-internal-9.1003.0 · GHC.Internal.Generics
Generic (URec Float p)Defined in ghc-internal-9.1003.0 · GHC.Internal.Generics
type Rep (URec Float p) = D1 ('MetaData "URec" "GHC.Internal.Generics" "ghc-internal" 'False) (C1 ('MetaCons "UFloat" 'PrefixI 'True) (S1 ('MetaSel ('Just "uFloat#") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedLazy) UFloat))Defined in ghc-internal-9.1003.0 · GHC.Internal.Generics
type Rep1 (URec Float) = D1 ('MetaData "URec" "GHC.Internal.Generics" "ghc-internal" 'False) (C1 ('MetaCons "UFloat" 'PrefixI 'True) (S1 ('MetaSel ('Just "uFloat#") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedLazy) UFloat))Defined in ghc-internal-9.1003.0 · GHC.Internal.Generics
data URec Float
- UFloatuFloat# :: Float#
Defined in ghc-internal-9.1003.0 · GHC.Internal.Generics
Used for marking occurrences of Float#

datadata Float#

#

Conversion

valuefloat2Int :: Float -> Int

#

valueint2Float :: Int -> Float

#

valueword2Float :: Word -> Float

#

valueintegerToFloat# :: Integer -> Float#

#

Convert an Integer to a Float#

valuenaturalToFloat# :: Natural -> Float#

#

Convert a Natural to a Float#

valuerationalToFloat :: Integer -> Integer -> Float

#

valuecastWord32ToFloat :: Word32 -> Float

#

castWord32ToFloat w does a bit-for-bit copy from an integral value to a floating-point value.

valuecastFloatToWord32 :: Float -> Word32

#

castFloatToWord32 f does a bit-for-bit copy from a floating-point value to an integral value.

valuecastWord32ToFloat# :: Word32# -> Float#

#

Bitcast a Word32# into a Float#

valuecastFloatToWord32# :: Float# -> Word32#

#

Bitcast a Float# into a Word32#

valuefloat2Double :: Float -> Double

#

Operations

valuefloorFloat :: Integral b => Float -> b

#

valueceilingFloat :: Integral b => Float -> b

#

valuetruncateFloat :: Integral b => Float -> b

#

valueroundFloat :: Integral b => Float -> b

#

valueproperFractionFloat :: Integral b => Float -> (b, Float)

#

Predicate

valueisFloatDenormalized :: Float -> Int

#

valueisFloatFinite :: Float -> Int

#

valueisFloatInfinite :: Float -> Int

#

valueisFloatNaN :: Float -> Int

#

valueisFloatNegativeZero :: Float -> Int

#

Comparison

valuegtFloat :: Float -> Float -> Bool

#

valuegeFloat :: Float -> Float -> Bool

#

valueleFloat :: Float -> Float -> Bool

#

valueltFloat :: Float -> Float -> Bool

#

Arithmetic

valueplusFloat :: Float -> Float -> Float

#

valueminusFloat :: Float -> Float -> Float

#

valuetimesFloat :: Float -> Float -> Float

#

valuedivideFloat :: Float -> Float -> Float

#

valuenegateFloat :: Float -> Float

#

valueexpFloat :: Float -> Float

#

valueexpm1Float :: Float -> Float

#

valuelogFloat :: Float -> Float

#

valuelog1pFloat :: Float -> Float

#

valuesqrtFloat :: Float -> Float

#

valuefabsFloat :: Float -> Float

#

valuesinFloat :: Float -> Float

#

valuecosFloat :: Float -> Float

#

valuetanFloat :: Float -> Float

#

valueasinFloat :: Float -> Float

#

valueacosFloat :: Float -> Float

#

valueatanFloat :: Float -> Float

#

valuesinhFloat :: Float -> Float

#

valuecoshFloat :: Float -> Float

#

valuetanhFloat :: Float -> Float

#

valueasinhFloat :: Float -> Float

#

valueacoshFloat :: Float -> Float

#

valueatanhFloat :: Float -> Float

#

Double

2 declarations

datadata Double

#

Double-precision floating point numbers. It is desirable that this type be at least equal in range and precision to the IEEE double-precision type.

Constructors

D# Double#

Instances25Enum, Floating, Fractional, Data, Num, Read, …

Enum DoubleDefined in ghc-internal-9.1003.0 · GHC.Internal.Float · orphan
fromEnum just truncates its argument, beware of all sorts of overflows.
List generators have extremely peculiar behavior, mandated by Haskell Report 2010:
Example1 expression
```
>>> [0..1.5][0.0,1.0,2.0]
```
Eq DoubleDefined in ghc-prim-0.12.0 · GHC.Classes
Note that due to the presence of NaN, Double's Eq instance does not satisfy reflexivity.
Example1 expression
```
>>> 0/0 == (0/0 :: Double)False
```
Also note that Double's Eq instance does not satisfy substitutivity:
Example2 expressions
```
>>> 0 == (-0 :: Double)True>>> recip 0 == recip (-0 :: Double)False
```
Floating DoubleDefined in ghc-internal-9.1003.0 · GHC.Internal.Float
Fractional DoubleDefined in ghc-internal-9.1003.0 · GHC.Internal.Float · orphan
This instance implements IEEE 754 standard with all its usual pitfalls about NaN, infinities and negative zero.
Example4 expressions
```
>>> 0 == (-0 :: Double)True>>> recip 0 == recip (-0 :: Double)False>>> map (/ 0) [-1, 0, 1][-Infinity,NaN,Infinity]>>> map (* 0) $ map (/ 0) [-1, 0, 1][NaN,NaN,NaN]
```
Data DoubleDefined in ghc-internal-9.1003.0 · GHC.Internal.Data.Data
Num DoubleDefined in ghc-internal-9.1003.0 · GHC.Internal.Float · orphan
This instance implements IEEE 754 standard with all its usual pitfalls about NaN, infinities and negative zero. Neither addition nor multiplication are associative or distributive:
Example3 expressions
```
>>> (0.1 + 0.1) + 0.4 == 0.1 + (0.1 + 0.4)False>>> (0.1 + 0.2) * 0.3 == 0.1 * 0.3 + 0.2 * 0.3False>>> (0.1 * 0.1) * 0.3 == 0.1 * (0.1 * 0.3)False
```
Ord DoubleDefined in ghc-prim-0.12.0 · GHC.Classes
IEEE 754 Double-precision type includes not only numbers, but also positive and negative infinities and a special element called NaN (which can be quiet or signal).
IEEE 754-2008, section 5.11 requires that if at least one of arguments of <=, <, >, >= is NaN then the result of the comparison is False, and instance Ord Double complies with this requirement. This violates the reflexivity: both NaN <= NaN and NaN >= NaN are False.
IEEE 754-2008, section 5.10 defines totalOrder predicate. Unfortunately, compare on Doubles violates the IEEE standard and does not define a total order. More specifically, both compare NaN x and compare x NaN always return GT.
Thus, users must be extremely cautious when using instance Ord Double. For instance, one should avoid ordered containers with keys represented by Double, because data loss and corruption may happen. An IEEE-compliant compare is available in fp-ieee package as TotallyOrdered newtype.
Moving further, the behaviour of min and max with regards to NaN is also non-compliant. IEEE 754-2008, section 5.3.1 defines that quiet NaN should be treated as a missing data by minNum and maxNum functions, for example, minNum(NaN, 1) = minNum(1, NaN) = 1. Some languages such as Java deviate from the standard implementing minNum(NaN, 1) = minNum(1, NaN) = NaN. However, min / max in base are even worse: min NaN 1 is 1, but min 1 NaN is NaN.
IEEE 754-2008 compliant min / max can be found in ieee754 package under minNum / maxNum names. Implementations compliant with minimumNumber / maximumNumber from a newer IEEE 754-2019, section 9.6 are available from fp-ieee package.
Read DoubleDefined in ghc-internal-9.1003.0 · GHC.Internal.Read
Real DoubleDefined in ghc-internal-9.1003.0 · GHC.Internal.Float · orphan
Beware that toRational generates garbage for non-finite arguments:
Example2 expressions
```
>>> toRational (1/0)179769313 (and 300 more digits...) % 1>>> toRational (0/0)269653970 (and 300 more digits...) % 1
```
RealFloat DoubleDefined in ghc-internal-9.1003.0 · GHC.Internal.Float
RealFrac DoubleDefined in ghc-internal-9.1003.0 · GHC.Internal.Float · orphan
Beware that results for non-finite arguments are garbage:
Example2 expressions
```
>>> [ f x | f <- [round, floor, ceiling], x <- [-1/0, 0/0, 1/0] ] :: [Int][0,0,0,0,0,0,0,0,0]>>> map properFraction [-1/0, 0/0, 1/0] :: [(Int, Double)][(0,0.0),(0,0.0),(0,0.0)]
```
and get even more non-sensical if you ask for Integer instead of Int.
Show DoubleDefined in ghc-internal-9.1003.0 · GHC.Internal.Float · orphan
Storable DoubleDefined in ghc-internal-9.1003.0 · GHC.Internal.Foreign.Storable
PrintfArg DoubleDefined in base-4.20.2.0 · Text.Printf
Generic1 (URec Double)Defined in ghc-internal-9.1003.0 · GHC.Internal.Generics
Foldable UDoubleDefined in ghc-internal-9.1003.0 · GHC.Internal.Data.Foldable
Traversable UDoubleDefined in ghc-internal-9.1003.0 · GHC.Internal.Data.Traversable
Functor (URec Double)Defined in ghc-internal-9.1003.0 · GHC.Internal.Generics
Eq (URec Double p)Defined in ghc-internal-9.1003.0 · GHC.Internal.Generics
Ord (URec Double p)Defined in ghc-internal-9.1003.0 · GHC.Internal.Generics
Show (URec Double p)Defined in ghc-internal-9.1003.0 · GHC.Internal.Generics
Generic (URec Double p)Defined in ghc-internal-9.1003.0 · GHC.Internal.Generics
type Rep (URec Double p) = D1 ('MetaData "URec" "GHC.Internal.Generics" "ghc-internal" 'False) (C1 ('MetaCons "UDouble" 'PrefixI 'True) (S1 ('MetaSel ('Just "uDouble#") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedLazy) UDouble))Defined in ghc-internal-9.1003.0 · GHC.Internal.Generics
type Rep1 (URec Double) = D1 ('MetaData "URec" "GHC.Internal.Generics" "ghc-internal" 'False) (C1 ('MetaCons "UDouble" 'PrefixI 'True) (S1 ('MetaSel ('Just "uDouble#") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedLazy) UDouble))Defined in ghc-internal-9.1003.0 · GHC.Internal.Generics
data URec Double
- UDoubleuDouble# :: Double#
Defined in ghc-internal-9.1003.0 · GHC.Internal.Generics
Used for marking occurrences of Double#

datadata Double#

#

Conversion

valuedouble2Int :: Double -> Int

#

valueint2Double :: Int -> Double

#

valueword2Double :: Word -> Double

#

valueintegerToDouble# :: Integer -> Double#

#

Convert an Integer to a Double#

valuenaturalToDouble# :: Natural -> Double#

#

Encode a Natural (mantissa) into a Double#

valuerationalToDouble :: Integer -> Integer -> Double

#

valuecastWord64ToDouble :: Word64 -> Double

#

castWord64ToDouble w does a bit-for-bit copy from an integral value to a floating-point value.

valuecastDoubleToWord64 :: Double -> Word64

#

castDoubleToWord64 f does a bit-for-bit copy from a floating-point value to an integral value.

valuecastWord64ToDouble# :: Word64# -> Double#

#

Bitcast a Word64# into a Double#

valuecastDoubleToWord64# :: Double# -> Word64#

#

Bitcast a Double# into a Word64#

valuedouble2Float :: Double -> Float

#

Operations

valuefloorDouble :: Integral b => Double -> b

#

valueceilingDouble :: Integral b => Double -> b

#

valuetruncateDouble :: Integral b => Double -> b

#

valueroundDouble :: Integral b => Double -> b

#

valueproperFractionDouble :: Integral b => Double -> (b, Double)

#

Predicate

valueisDoubleDenormalized :: Double -> Int

#

valueisDoubleFinite :: Double -> Int

#

valueisDoubleInfinite :: Double -> Int

#

valueisDoubleNaN :: Double -> Int

#

valueisDoubleNegativeZero :: Double -> Int

#

Comparison

valuegtDouble :: Double -> Double -> Bool

#

valuegeDouble :: Double -> Double -> Bool

#

valueleDouble :: Double -> Double -> Bool

#

valueltDouble :: Double -> Double -> Bool

#

Arithmetic

valueplusDouble :: Double -> Double -> Double

#

valueminusDouble :: Double -> Double -> Double

#

valuetimesDouble :: Double -> Double -> Double

#

valuedivideDouble :: Double -> Double -> Double

#

valuenegateDouble :: Double -> Double

#

valueexpDouble :: Double -> Double

#

valueexpm1Double :: Double -> Double

#

valuelogDouble :: Double -> Double

#

valuelog1pDouble :: Double -> Double

#

valuesqrtDouble :: Double -> Double

#

valuefabsDouble :: Double -> Double

#

valuesinDouble :: Double -> Double

#

valuecosDouble :: Double -> Double

#

valuetanDouble :: Double -> Double

#

valueasinDouble :: Double -> Double

#

valueacosDouble :: Double -> Double

#

valueatanDouble :: Double -> Double

#

valuesinhDouble :: Double -> Double

#

valuecoshDouble :: Double -> Double

#

valuetanhDouble :: Double -> Double

#

valueasinhDouble :: Double -> Double

#

valueacoshDouble :: Double -> Double

#

valueatanhDouble :: Double -> Double

#

Formatting

5 declarations

valueshowFloat :: RealFloat a => a -> ShowS

#

Show a signed RealFloat value to full precision using standard decimal notation for arguments whose absolute value lies between 0.1 and 9,999,999, and scientific notation otherwise.

datadata FFFormat

#

FFExponent FFFixed FFGeneric

valueformatRealFloat :: RealFloat a => FFFormat -> Maybe Int -> a -> String

#

valueformatRealFloatAlt

:: RealFloat a
=> FFFormat
-> Maybe Int
-> Bool
-> a
-> String

#

valueshowSignedFloat

:: RealFloat a
=> (a -> ShowS)
a function that can show unsigned values
-> Int
the precedence of the enclosing context
-> a
the value to show
-> ShowS

#

Operations

7 declarations

valuelog1mexpOrd :: (Ord a, Floating a) => a -> a

#

Default implementation for log1mexp requiring Ord to test against a threshold to decide which implementation variant to use.

valueroundTo :: Int -> Int -> [Int] -> (Int, [Int])

#

valuefloatToDigits :: RealFloat a => Integer -> a -> ([Int], Int)

#

floatToDigits takes a base and a non-negative RealFloat number, and returns a list of digits and an exponent. In particular, if x>=0, and

floatToDigits base x = ([d1,d2,...,dn], e)

then

```
n >= 1
```
```
x = 0.d1d2...dn * (base**e)
```
```
0 <= di <= base-1
```

valueintegerToBinaryFloat' :: RealFloat a => Integer -> a

#

Converts a positive integer to a floating-point value.

The value nearest to the argument will be returned. If there are two such values, the one with an even significand will be returned (i.e. IEEE roundTiesToEven).

The argument must be strictly positive, and floatRadix (undefined :: a) must be 2.